- About
- News
- Contact us
- Call us: +64 9 828 1180 or +64 021 959 958
- Menu ›
New Zealand's Trusted Water Solutions
Philmac VERSA-Phil with 20/25mm M/F Adapter
Waiting in line is never fun. In just 2 minutes, 20 cows can drain a 400 litre trough, keeping those who missed out waiting in line while the trough is refilled. The all new Philmac Float Valve Solution can comfortably replace water faster than your stock can drink it, whilst with standing the toughest conditions. Now delivering over 300L/min with a shut off pressure of 1200kPa, your livestock will never have to wait in line for water again. If you need a valve that works, insist on Philmac.
HIGH PERFORMANCE - HIGH PRESSURE SHUTOFF
The new Philmac Float Valve is now rated to a shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). This is based on using the recommended float (ball) size.
The all new Philmac VersaPHIL Float Valve also utilise a brass lever assembly which is thicker and stronger than all others on the market. These are manufactured from dezincification resistant (DZR) brass which means the brass is resistant in soil and water environments to corrosion involving the loss of zinc leaving a residue of spongy or porous copper.
The all new Philmac VersaPHIL Float Valve comes with a 3/4" by 1" threaded adaptor pre-installed on every valve sold. Now one valve can connect with either a 3/4" or 1" threaded connection, providing more flexibility and further value for money.
Approximate time to refill a 400 litre trough at 600kPa = 110 seconds
Easy Disassembly
The new valve design has been improved by utilising an R-pin to sercure the arm for easy tool-free cleaning or replacement of the arm or rubber seal without having to un-install the valve. Simply unscrew the cap/seal washer assembly
For full technical information & flow rates click here
How to adjust the water level or lever arm on the Philmac PN12 Float Valve
How to install the underwater kit on the Philmac PN12 Float
PHILMAC VERSA-PHIL 20 X 25MM M/F ADAPTER
| Code | Description | Lever Size | Float Size | Pressure | Pressure |
|---|---|---|---|---|---|
| PHPN69 | PHILMAC VERSA-PHIL 20 X 25MM M/F ADAPTER | 300mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN69S | PHILMAC VERSA-PHIL 20 X 25MM M/F ADAPTER | 165mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN72 | PHILMAC VERSA-PHIL 20 X 25MM M/F ADAPTER with CORD | 300mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN72S | PHILMAC VERSA-PHIL 20 X 25MM M/F ADAPTER with CORD | 165mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
PHILMAC VERSA-PHIL FLOAT VALVE WITH TAIL ADAPTOR
| Code | Description | Lever Size | Float Size | Pressure | Pressure |
|---|---|---|---|---|---|
| PHPN6920T | PHILMAC VERSA-PHIL FLOAT VALVE W/TAIL 20MM | 300mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN6920TS | PHILMAC VERSA-PHIL FLOAT VALVE W/TAIL 20MM - SHORT ARM | 165mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN6925T | PHILMAC VERSA-PHIL FLOAT VALVE W/TAIL 25MM | 300mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
| PHPN6925TS | PHILMAC VERSA-PHIL FLOAT VALVE W/TAIL 25MM - SHORT ARM | 165mm | 6" inch (150) | shut off pressure of 1200 kPa (174 psi) or 12 bar (static shutoff). | 295L/min (@600kPa) |
VERSA-Phil Spare parts
| Code | Description |
|---|---|
| PHPN69A | PHILMAC VERSA-PHIL LEVER ARM 300MM |
| PHPN69SA | PHILMAC VERSA-PHIL LEVER ARM 165MM |
| PHPN69AD | VERSA-PHIL 25MM 20MM ADAPTER |
| PHPN69P | VERSA-PHIL PIVOT PIN |
| PHPN69SK | VERSA-PHIL SERVICE KIT |
| PHPN69W | VERSA-PHIL SEAT WASHER |
How to Install the VersaPHIL Float Valve
